From c7da9a56d608145cc763bcfc9329b92c4244d8d9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:53 +0000 Subject: [PATCH] ARM: PL08x: move AHB master port selection into prep_* functions As we initialize the default cctl value in the prep_* functions along with the increment settings, we don't need to repeat the selection of the AHB ports each time we create a LLI entry. Do this in the prep_* functions once per transfer. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 47 ++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 72cc971e93e5..4ee0ab19b1b6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -597,26 +597,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Get the default CCTL */ cctl = txd->cctl; - /* - * On the PL080 we have two bus masters and we - * should select one for source and one for - * destination. We try to use AHB2 for the - * bus which does not increment (typically the - * peripheral) else we just choose something. - */ - cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); - if (pl08x->vd->dualmaster) { - if (cctl & PL080_CONTROL_SRC_INCR) - /* Source increments, use AHB2 for destination */ - cctl |= PL080_CONTROL_DST_AHB2; - else if (cctl & PL080_CONTROL_DST_INCR) - /* Destination increments, use AHB2 for source */ - cctl |= PL080_CONTROL_SRC_AHB2; - else - /* Just pick something, source AHB1 dest AHB2 */ - cctl |= PL080_CONTROL_DST_AHB2; - } - /* Find maximum width of the source bus */ txd->srcbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> @@ -1340,14 +1320,25 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->direction = DMA_NONE; txd->srcbus.addr = src; txd->dstbus.addr = dest; + txd->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl; + txd->cctl = pl08x->pd->memcpy_channel.cctl & + ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - txd->len = len; + + /* + * On the PL080 we have two bus masters and we should select one for + * source and one for destination. We try to use AHB2 for the bus + * which does not increment (typically the peripheral) else we just + * choose something. + */ + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) @@ -1399,8 +1390,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; + txd->len = sgl->length; + txd->cctl = plchan->cd->cctl & - ~(PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | + ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 | + PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | PL080_CONTROL_PROT_MASK); /* Access the cell in privileged mode, non-bufferable, non-cacheable */ @@ -1409,6 +1403,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; @@ -1417,6 +1414,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; + if (pl08x->vd->dualmaster) + /* Destination increments, use AHB2 for source */ + txd->cctl |= PL080_CONTROL_SRC_AHB2; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else @@ -1427,7 +1427,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( "%s direction unsupported\n", __func__); return NULL; } - txd->len = sgl->length; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) -- 2.34.1