From d3755f5e6cd222cd5aff949228d32aa8446023a5 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 17 Oct 2013 14:08:09 -0700 Subject: [PATCH] tty: xuartps: Force enable the UART in xuartps_console_write It is possible that under certain circumstances xuartps_console_write is entered while the UART disabled. When this happens the code will busy loop in xuartps_console_putchar, since the character is never written and the TXEMPTY flag is never set. The result is a system lockup. This patch force enables the UART for the duration of xuartps_console_write to avoid this. Signed-off-by: Lars-Peter Clausen Signed-off-by: John Linn Signed-off-by: Michal Simek Signed-off-by: Soren Brinkmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 6e8ec6e9d5a2..fdc739b55eb3 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -953,7 +953,7 @@ static void xuartps_console_write(struct console *co, const char *s, { struct uart_port *port = &xuartps_port[co->index]; unsigned long flags; - unsigned int imr; + unsigned int imr, ctrl; int locked = 1; if (oops_in_progress) @@ -965,9 +965,19 @@ static void xuartps_console_write(struct console *co, const char *s, imr = xuartps_readl(XUARTPS_IMR_OFFSET); xuartps_writel(imr, XUARTPS_IDR_OFFSET); + /* + * Make sure that the tx part is enabled. Set the TX enable bit and + * clear the TX disable bit to enable the transmitter. + */ + ctrl = xuartps_readl(XUARTPS_CR_OFFSET); + xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN, + XUARTPS_CR_OFFSET); + uart_console_write(port, s, count, xuartps_console_putchar); xuartps_console_wait_tx(port); + xuartps_writel(ctrl, XUARTPS_CR_OFFSET); + /* restore interrupt state, it seems like there may be a h/w bug * in that the interrupt enable register should not need to be * written based on the data sheet -- 2.34.1