From d41d547a419ca2d4df867a40a553abfe0c3df1d6 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Thu, 11 Apr 2013 17:29:39 +0200 Subject: [PATCH] MIPS: octeon: Fix GPIO number in IRQ chip private data Current GPIO chip implementation in octeon-irq is still broken, even after upstream commit 87161ccdc61862c8b49e75c21209d7f79dc758e9 (MIPS: Octeon: Fix broken interrupt controller code). It works for GPIO IRQs that have reset-default configuration, but not for edge-triggered ones. The problem is in octeon_irq_gpio_map_common(), which passes modified "hw" variable (which has range of possible values 16..31) as "gpio_line" parameter to octeon_irq_set_ciu_mapping(), which saves it in private data of the IRQ chip. Later, neither octeon_irq_gpio_setup() is able to re-configure GPIOs (cvmx_write_csr() is writing to non-existent CVMX_GPIO_BIT_CFGX), nor octeon_irq_ciu_gpio_ack() is able to acknowledge such IRQ, because "mask" is incorrect. Fix is trivial and has been tested on Cavium Octeon II -based board, including both level-triggered and edge-triggered GPIO IRQs. Signed-off-by: Alexander Sverdlin Cc: David Daney Acked-by: David Daney Patchwork: http://patchwork.linux-mips.org/patch/4980/ Acked-by: John Crispin --- arch/mips/cavium-octeon/octeon-irq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 156aa6143e11..a22f06a6f7ca 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1032,9 +1032,8 @@ static int octeon_irq_gpio_map_common(struct irq_domain *d, if (!octeon_irq_virq_in_range(virq)) return -EINVAL; - hw += gpiod->base_hwirq; - line = hw >> 6; - bit = hw & 63; + line = (hw + gpiod->base_hwirq) >> 6; + bit = (hw + gpiod->base_hwirq) & 63; if (line > line_limit || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; -- 2.34.1