From d68bb12ab4a306ee76ab33a57b2a0067d4d5092d Mon Sep 17 00:00:00 2001 From: Yanbo Li Date: Fri, 23 Jan 2015 08:18:20 +0800 Subject: [PATCH] ath10k: Enable the MCS8 and MCS9 at 2.4G band Enable the MCS8 and MCS9 support for 2.4G band, it will use these data rate with other devices having the same capability. Signed-off-by: Yanbo Li Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 14 ++++++++++++-- drivers/net/wireless/ath/ath10k/wmi.h | 2 +- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 4ee74f660443..f9440deffa26 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1586,6 +1586,10 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, return; arg->peer_flags |= WMI_PEER_VHT; + + if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) + arg->peer_flags |= WMI_PEER_VHT_2G; + arg->peer_vht_caps = vht_cap->cap; ampdu_factor = (vht_cap->cap & @@ -1664,7 +1668,12 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, switch (ar->hw->conf.chandef.chan->band) { case IEEE80211_BAND_2GHZ: - if (sta->ht_cap.ht_supported) { + if (sta->vht_cap.vht_supported) { + if (sta->bandwidth == IEEE80211_STA_RX_BW_40) + phymode = MODE_11AC_VHT40; + else + phymode = MODE_11AC_VHT20; + } else if (sta->ht_cap.ht_supported) { if (sta->bandwidth == IEEE80211_STA_RX_BW_40) phymode = MODE_11NG_HT40; else @@ -5301,7 +5310,8 @@ int ath10k_mac_register(struct ath10k *ar) band->bitrates = ath10k_g_rates; band->ht_cap = ht_cap; - /* vht is not supported in 2.4 GHz */ + /* Enable the VHT support at 2.4 GHz */ + band->vht_cap = vht_cap; ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band; } diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 4b654083b857..20ce3603e64b 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4514,7 +4514,7 @@ struct wmi_peer_set_q_empty_callback_cmd { #define WMI_PEER_SPATIAL_MUX 0x00200000 #define WMI_PEER_VHT 0x02000000 #define WMI_PEER_80MHZ 0x04000000 -#define WMI_PEER_PMF 0x08000000 +#define WMI_PEER_VHT_2G 0x08000000 /* * Peer rate capabilities. -- 2.34.1