From d870ea1d6bc5057f2599416655b42ab192dae6d0 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Wed, 28 Sep 2011 15:41:57 +0800 Subject: [PATCH] MX53 Enable the AHCI SATA on MX53 SMD board Signed-off-by: Richard Zhu Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_smd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index bc02894eafef..efcab68840ae 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -35,6 +35,7 @@ #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3) static iomux_v3_cfg_t mx53_smd_pads[] = { MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, @@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { .bitrate = 100000, }; +static inline void mx53_smd_ahci_pwr_on(void) +{ + int ret; + + /* Enable SATA PWR */ + ret = gpio_request_one(MX53_SMD_SATA_PWR_EN, + GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr"); + if (ret) { + pr_err("failed to enable SATA_PWR_EN: %d\n", ret); + return; + } +} + static void __init mx53_smd_board_init(void) { imx53_soc_init(); @@ -125,6 +139,8 @@ static void __init mx53_smd_board_init(void) imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(1, NULL); imx53_add_sdhci_esdhc_imx(2, NULL); + mx53_smd_ahci_pwr_on(); + imx53_add_ahci_imx(); } static void __init mx53_smd_timer_init(void) -- 2.34.1