From d9e8e976faef867f9be579d6a76e1271d5d30da8 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 14 May 2015 06:45:24 +0000 Subject: [PATCH] serial: sirf: add uart receive's some error counter and mark add overrun error's flag mark and parity's counter, we can show the statistic from procfs node. BTW, let the indentation of stick bits configuration look better. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index ffeb7663bd6e..a5007216338d 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -606,14 +606,18 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) if (uart_handle_break(port)) goto recv_char; } - if (intr_status & uint_st->sirfsoc_rx_oflow) + if (intr_status & uint_st->sirfsoc_rx_oflow) { port->icount.overrun++; + flag = TTY_OVERRUN; + } if (intr_status & uint_st->sirfsoc_frm_err) { port->icount.frame++; flag = TTY_FRAME; } - if (intr_status & uint_st->sirfsoc_parity_err) + if (intr_status & uint_st->sirfsoc_parity_err) { + port->icount.parity++; flag = TTY_PARITY; + } wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); @@ -932,10 +936,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, config_reg |= SIRFUART_STICK_BIT_MARK; else config_reg |= SIRFUART_STICK_BIT_SPACE; - } else if (termios->c_cflag & PARODD) { - config_reg |= SIRFUART_STICK_BIT_ODD; } else { - config_reg |= SIRFUART_STICK_BIT_EVEN; + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_ODD; + else + config_reg |= SIRFUART_STICK_BIT_EVEN; } } } else { -- 2.34.1