From db95f150b98691bc2a6e8673d7802bb6ee1b5447 Mon Sep 17 00:00:00 2001 From: =?utf8?q?T=C3=BClin=20=C4=B0zer?= Date: Wed, 15 May 2013 03:43:51 +0300 Subject: [PATCH] Staging: bcm: Fixed warning 'space required before the open parenthesis '(''. MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This patch fixes warning 'space required before the open parenthesis '('' found by checkpacth.pl in driver bcm. Signed-off-by: Tülin İzer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/bcm/InterfaceIdleMode.c | 48 ++++++++++++------------- 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c index 9ddfc1de354f..534782866042 100644 --- a/drivers/staging/bcm/InterfaceIdleMode.c +++ b/drivers/staging/bcm/InterfaceIdleMode.c @@ -50,27 +50,27 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer)); - if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) { + if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype"); - if(ntohl(*(puiBuffer+1)) == 0 ) { + if (ntohl(*(puiBuffer+1)) == 0 ) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W"); status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead)); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); return status; } - if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { uiRegRead = 0x00000000 ; status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead)); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); return status; } } /* Below Register should not br read in case of Manual and Protocol Idle mode */ - else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { + else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { /* clear on read Register */ bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { @@ -95,7 +95,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui wake_up(&Adapter->lowpower_mode_wait_queue); } else { - if(TRUE == Adapter->IdleMode) + if (TRUE == Adapter->IdleMode) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode...."); return status ; @@ -120,7 +120,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui uiRegRead |= (1<<17); status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n"); return status; } @@ -128,7 +128,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui } SendIdleModeResponse(Adapter); } - } else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) { + } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params"); OverrideServiceFlowParams(Adapter, puiBuffer); } @@ -147,33 +147,33 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter; /* Abort Bus suspend if its already suspended */ - if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) { + if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) { status = usb_autopm_get_interface(psInterfaceAdapter->interface); BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status); } - if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) + if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) || (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) { /* write the SW abort pattern. */ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern); status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern)); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); return status; } } - if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { value = 0x80000000; status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value)); - if(status) + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed"); return status; } - } else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { + } else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { /* * Get a Interrupt Out URB and send 8 Bytes Down * To be Done in Thread Context. @@ -186,7 +186,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int 8, &lenwritten, 5000); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status); return status; } else { @@ -196,21 +196,21 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int /* mdelay(25); */ timeout = jiffies + msecs_to_jiffies(50) ; - while( timeout > jiffies ) { + while ( timeout > jiffies ) { itr++ ; rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT)); - if(0xbece3200 == (chip_id&~(0xF0))) + if (0xbece3200 == (chip_id&~(0xF0))) chip_id = chip_id&~(0xF0); - if(chip_id == Adapter->chip_id) + if (chip_id == Adapter->chip_id) break; } - if(timeout < jiffies ) + if (timeout < jiffies ) BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec"); else BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr); status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status)); - if(status) { + if (status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); return status; } @@ -220,7 +220,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter) { ULONG Status = 0; - if(Adapter->bTriedToWakeUpFromlowPowerMode) { + if (Adapter->bTriedToWakeUpFromlowPowerMode) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n"); } else { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n"); @@ -237,11 +237,11 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter) INT Status = 0; int bytes; - if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { /* clear idlemode interrupt. */ uiRegVal = 0; Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal)); - if(Status) { + if (Status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status); return; } -- 2.34.1