From dc2eb76c40590a3c080294d1fbd000c8f70d88a9 Mon Sep 17 00:00:00 2001 From: Cyril Chemparathy Date: Tue, 18 May 2010 12:51:17 -0400 Subject: [PATCH] Davinci: generalized debug macros This patch adopts a debug uart selection similar to the OMAP model. During the boot process, the uncompress code determines the physical and virtual base addresses of the board-specific debug uart. These addresses are then passed on to the in-kernel debug macros through a small chunk of memory placed just below the page tables (@0x80003ff8). Signed-off-by: Cyril Chemparathy Signed-off-by: Kevin Hilman --- .../mach-davinci/include/mach/debug-macro.S | 50 +++++++++--- arch/arm/mach-davinci/include/mach/serial.h | 13 +++ .../mach-davinci/include/mach/uncompress.h | 80 ++++++++++++++----- 3 files changed, 111 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 3cd93a801d9b..f761dfdb8689 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -17,22 +17,50 @@ */ #include + +#include + +#include + #define UART_SHIFT 2 + .pushsection .data +davinci_uart_phys: .word 0 +davinci_uart_virt: .word 0 + .popsection + .macro addruart, rx, tmp + + /* Use davinci_uart_phys/virt if already configured */ +10: mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =__virt_to_phys(davinci_uart_phys) + ldrne \rx, =davinci_uart_virt + ldr \rx, [\rx] + cmp \rx, #0 @ is port configured? + bne 99f @ already configured + mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0x01000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \ - defined(CONFIG_MACH_DAVINCI_DA850_EVM) - orr \rx, \rx, #0x00d00000 @ physical base address - orr \rx, \rx, #0x0000d000 @ of UART 2 -#else - orr \rx, \rx, #0x00c20000 @ UART 0 -#endif + + /* Copy uart phys address from decompressor uart info */ + ldreq \tmp, =__virt_to_phys(davinci_uart_phys) + ldrne \tmp, =davinci_uart_phys + ldreq \rx, =DAVINCI_UART_INFO + ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rx, [\rx, #0] + str \rx, [\tmp] + + /* Copy uart virt address from decompressor uart info */ + ldreq \tmp, =__virt_to_phys(davinci_uart_virt) + ldrne \tmp, =davinci_uart_virt + ldreq \rx, =DAVINCI_UART_INFO + ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rx, [\rx, #4] + str \rx, [\tmp] + + b 10b +99: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index f6c4f34909a2..b21ec224b11d 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -11,8 +11,19 @@ #ifndef __ASM_ARCH_SERIAL_H #define __ASM_ARCH_SERIAL_H +#include + #include +/* + * Stolen area that contains debug uart physical and virtual addresses. These + * addresses are filled in by the uncompress.h code, and are used by the debug + * macros in debug-macro.S. + * + * This area sits just below the page tables (see arch/arm/kernel/head.S). + */ +#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) + #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -26,11 +37,13 @@ #define UART_DM646X_SCR 0x10 #define UART_DM646X_SCR_TX_WATERMARK 0x08 +#ifndef __ASSEMBLY__ struct davinci_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; }; extern int davinci_serial_init(struct davinci_uart_config *); +#endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 33796b4db17f..20c23a3bc907 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -1,8 +1,17 @@ /* * Serial port stubs for kernel decompress status messages * - * Author: Anant Gole - * (C) Copyright (C) 2006, Texas Instruments, Inc + * Initially based on: + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Original copyrights follow. + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Rewritten by: + * Author: + * 2004 (c) MontaVista Software, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -11,30 +20,17 @@ #include #include -#include #include -extern unsigned int __machine_arch_type; +#include static u32 *uart; - -static u32 *get_uart_base(void) -{ - if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM || - __machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM) - return (u32 *)DA8XX_UART2_BASE; - else - return (u32 *)DAVINCI_UART0_BASE; -} +static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); /* PORT_16C550A, in polled non-fifo mode */ - static void putc(char c) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -42,12 +38,54 @@ static void putc(char c) static inline void flush(void) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } -#define arch_decomp_setup() +static inline void set_uart_info(u32 phys, void * __iomem virt) +{ + uart = (u32 *)phys; + uart_info[0] = phys; + uart_info[1] = (u32)virt; +} + +#define _DEBUG_LL_ENTRY(machine, phys, virt) \ + if (machine_is_##machine()) { \ + set_uart_info(phys, virt); \ + break; \ + } + +#define DEBUG_LL_DAVINCI(machine, port) \ + _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \ + IO_ADDRESS(DAVINCI_UART##port##_BASE)) + +#define DEBUG_LL_DA8XX(machine, port) \ + _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \ + IO_ADDRESS(DA8XX_UART##port##_BASE)) + +static inline void __arch_decomp_setup(unsigned long arch_id) +{ + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* Davinci boards */ + DEBUG_LL_DAVINCI(davinci_evm, 0); + DEBUG_LL_DAVINCI(sffsdr, 0); + DEBUG_LL_DAVINCI(neuros_osd2, 0); + DEBUG_LL_DAVINCI(davinci_dm355_evm, 0); + DEBUG_LL_DAVINCI(dm355_leopard, 0); + DEBUG_LL_DAVINCI(davinci_dm6467_evm, 0); + DEBUG_LL_DAVINCI(davinci_dm365_evm, 0); + + /* DA8xx boards */ + DEBUG_LL_DA8XX(davinci_da830_evm, 2); + DEBUG_LL_DA8XX(davinci_da850_evm, 2); + } while (0); +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) #define arch_decomp_wdog() -- 2.34.1