From e7ae328961ffcf78bb18d0ecdb1e5a50d1185336 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 28 Apr 2016 16:45:05 +0200 Subject: [PATCH] ath9k: Move TX99 config option under ath9k debugging Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there such that "make menuconfig" will indent TX99 support below ath9k debugging. Signed-off-by: Helmut Schaa Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/Kconfig | 40 +++++++++++++------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 40fa915d6f35..f68cb00450e0 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -75,6 +75,26 @@ config ATH9K_STATION_STATISTICS ---help--- This option enables detailed statistics for association stations. +config ATH9K_TX99 + bool "Atheros ath9k TX99 testing support" + depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + Say N. This should only be enabled on systems undergoing + certification testing and evaluation in a controlled environment. + Enabling this will only enable TX99 support, all other modes of + operation will be disabled. + + TX99 support enables Specific Absorption Rate (SAR) testing. + SAR is the unit of measurement for the amount of radio frequency(RF) + absorbed by the body when using a wireless device. The RF exposure + limits used are expressed in the terms of SAR, which is a measure + of the electric and magnetic field strength and power density for + transmitters operating at frequencies from 300 kHz to 100 GHz. + Regulatory bodies around the world require that wireless device + be evaluated to meet the RF exposure limits set forth in the + governmental SAR regulations. + config ATH9K_DFS_CERTIFIED bool "Atheros DFS support for certified platforms" depends on ATH9K && CFG80211_CERTIFICATION_ONUS @@ -103,26 +123,6 @@ config ATH9K_DYNACK based on ACK frame RX timestamp, TX frame timestamp and frame duration -config ATH9K_TX99 - bool "Atheros ath9k TX99 testing support" - depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS - default n - ---help--- - Say N. This should only be enabled on systems undergoing - certification testing and evaluation in a controlled environment. - Enabling this will only enable TX99 support, all other modes of - operation will be disabled. - - TX99 support enables Specific Absorption Rate (SAR) testing. - SAR is the unit of measurement for the amount of radio frequency(RF) - absorbed by the body when using a wireless device. The RF exposure - limits used are expressed in the terms of SAR, which is a measure - of the electric and magnetic field strength and power density for - transmitters operating at frequencies from 300 kHz to 100 GHz. - Regulatory bodies around the world require that wireless device - be evaluated to meet the RF exposure limits set forth in the - governmental SAR regulations. - config ATH9K_WOW bool "Wake on Wireless LAN support (EXPERIMENTAL)" depends on ATH9K && PM -- 2.34.1