From ea38d13fd1666bc030cb1c0feec5b0da2f89f9b2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 18 Jun 2012 14:03:16 +0800 Subject: [PATCH] regulator: core: Change the unit of ramp_delay from mV/uS to uV/uS This change makes it possible to set ramp_delay with 0.xxx mV/uS without truncation issue. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 2 +- drivers/regulator/core.c | 4 ++-- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index d0a7b1296a36..bec5d5747411 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -10,7 +10,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node -- regulator-ramp-delay: ramp delay for regulator(in mV/uS) +- regulator-ramp-delay: ramp delay for regulator(in uV/uS) Example: diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 73a3d874ca6e..ce0a3462e0de 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2319,11 +2319,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, if (rdev->desc->uV_step) { return DIV_ROUND_UP(rdev->desc->uV_step * abs(new_selector - old_selector), - ramp_delay * 1000); + ramp_delay); } else if (rdev->desc->volt_table) { return DIV_ROUND_UP(abs(rdev->desc->volt_table[new_selector] - rdev->desc->volt_table[old_selector]), - ramp_delay * 1000); + ramp_delay); } else { rdev_warn(rdev, "Unsupported voltage mapping settings\n"); } diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ddc155d262da..84f999ed394b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -173,7 +173,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5f37ad3cc172..40dd0a394cfa 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,7 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) */ struct regulation_constraints { -- 2.34.1