From ecd06305c9a077ab5aa000cb8027e2c1c872f25f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 4 Feb 2015 18:02:55 +0900 Subject: [PATCH] PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR PCIEPARL and PCIEPARH are macros that calculate register addresses. However, the register names are incorrect. Change them to PCIEPALR and PCIEPAUR. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Bjorn Helgaas Acked-by: Phil Edworthy Acked-by: Simon Horman --- drivers/pci/host/pcie-rcar.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index a910f795bfee..c086210f2ffd 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -64,8 +64,8 @@ #define LAR_ENABLE (1 << 1) /* PCIe address reg & mask */ -#define PCIEPARL(x) (0x03400 + ((x) * 0x20)) -#define PCIEPARH(x) (0x03404 + ((x) * 0x20)) +#define PCIEPALR(x) (0x03400 + ((x) * 0x20)) +#define PCIEPAUR(x) (0x03404 + ((x) * 0x20)) #define PCIEPAMR(x) (0x03408 + ((x) * 0x20)) #define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20)) #define PAR_ENABLE (1 << 31) @@ -341,9 +341,9 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) else res_start = res->start; - rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win)); + rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win)); rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F, - PCIEPARL(win)); + PCIEPALR(win)); /* First resource is for IO */ mask = PAR_ENABLE; -- 2.34.1