From ed1a230f96eb4610f1f4296b8c3c067389ddf540 Mon Sep 17 00:00:00 2001 From: "Bruce E. Robertson" Date: Mon, 6 Feb 2012 15:59:01 +0000 Subject: [PATCH] Add I2C driver for Summit Microelectronics SMB347 Battery Charger. MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Driver support for the Summit I²C battery charger. This is used in some Intel devices. Signed-off-by: Bruce E. Robertson Signed-off-by: Alan Cox Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/smb347-charger.c | 1294 ++++++++++++++++++++++++++ include/linux/power/smb347-charger.h | 117 +++ 4 files changed, 1419 insertions(+) create mode 100644 drivers/power/smb347-charger.c create mode 100644 include/linux/power/smb347-charger.h diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 97680d8fa238..c728d26dca6c 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -274,4 +274,11 @@ config CHARGER_MAX8998 Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. +config CHARGER_SMB347 + tristate "Summit Microelectronics SMB347 Battery Charger" + depends on I2C + help + Say Y to include support for Summit Microelectronics SMB347 + Battery Charger. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e429008eaf10..894710e336f0 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c new file mode 100644 index 000000000000..ce1694d1a365 --- /dev/null +++ b/drivers/power/smb347-charger.c @@ -0,0 +1,1294 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson + * Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Configuration registers. These are mirrored to volatile RAM and can be + * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be + * reloaded from non-volatile registers after POR. + */ +#define CFG_CHARGE_CURRENT 0x00 +#define CFG_CHARGE_CURRENT_FCC_MASK 0xe0 +#define CFG_CHARGE_CURRENT_FCC_SHIFT 5 +#define CFG_CHARGE_CURRENT_PCC_MASK 0x18 +#define CFG_CHARGE_CURRENT_PCC_SHIFT 3 +#define CFG_CHARGE_CURRENT_TC_MASK 0x07 +#define CFG_CURRENT_LIMIT 0x01 +#define CFG_CURRENT_LIMIT_DC_MASK 0xf0 +#define CFG_CURRENT_LIMIT_DC_SHIFT 4 +#define CFG_CURRENT_LIMIT_USB_MASK 0x0f +#define CFG_FLOAT_VOLTAGE 0x03 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK 0xc0 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT 6 +#define CFG_STAT 0x05 +#define CFG_STAT_DISABLED BIT(5) +#define CFG_STAT_ACTIVE_HIGH BIT(7) +#define CFG_PIN 0x06 +#define CFG_PIN_EN_CTRL_MASK 0x60 +#define CFG_PIN_EN_CTRL_ACTIVE_HIGH 0x40 +#define CFG_PIN_EN_CTRL_ACTIVE_LOW 0x60 +#define CFG_PIN_EN_APSD_IRQ BIT(1) +#define CFG_PIN_EN_CHARGER_ERROR BIT(2) +#define CFG_THERM 0x07 +#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK 0x03 +#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT 0 +#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK 0x0c +#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 +#define CFG_THERM_MONITOR_DISABLED BIT(4) +#define CFG_SYSOK 0x08 +#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) +#define CFG_OTHER 0x09 +#define CFG_OTHER_RID_MASK 0xc0 +#define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 +#define CFG_OTG 0x0a +#define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 +#define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 +#define CFG_OTG_CC_COMPENSATION_MASK 0xc0 +#define CFG_OTG_CC_COMPENSATION_SHIFT 6 +#define CFG_TEMP_LIMIT 0x0b +#define CFG_TEMP_LIMIT_SOFT_HOT_MASK 0x03 +#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT 0 +#define CFG_TEMP_LIMIT_SOFT_COLD_MASK 0x0c +#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT 2 +#define CFG_TEMP_LIMIT_HARD_HOT_MASK 0x30 +#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT 4 +#define CFG_TEMP_LIMIT_HARD_COLD_MASK 0xc0 +#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT 6 +#define CFG_FAULT_IRQ 0x0c +#define CFG_FAULT_IRQ_DCIN_UV BIT(2) +#define CFG_STATUS_IRQ 0x0d +#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4) +#define CFG_ADDRESS 0x0e + +/* Command registers */ +#define CMD_A 0x30 +#define CMD_A_CHG_ENABLED BIT(1) +#define CMD_A_SUSPEND_ENABLED BIT(2) +#define CMD_A_ALLOW_WRITE BIT(7) +#define CMD_B 0x31 +#define CMD_C 0x33 + +/* Interrupt Status registers */ +#define IRQSTAT_A 0x35 +#define IRQSTAT_C 0x37 +#define IRQSTAT_C_TERMINATION_STAT BIT(0) +#define IRQSTAT_C_TERMINATION_IRQ BIT(1) +#define IRQSTAT_C_TAPER_IRQ BIT(3) +#define IRQSTAT_E 0x39 +#define IRQSTAT_E_USBIN_UV_STAT BIT(0) +#define IRQSTAT_E_USBIN_UV_IRQ BIT(1) +#define IRQSTAT_E_DCIN_UV_STAT BIT(4) +#define IRQSTAT_E_DCIN_UV_IRQ BIT(5) +#define IRQSTAT_F 0x3a + +/* Status registers */ +#define STAT_A 0x3b +#define STAT_A_FLOAT_VOLTAGE_MASK 0x3f +#define STAT_B 0x3c +#define STAT_C 0x3d +#define STAT_C_CHG_ENABLED BIT(0) +#define STAT_C_CHG_MASK 0x06 +#define STAT_C_CHG_SHIFT 1 +#define STAT_C_CHARGER_ERROR BIT(6) +#define STAT_E 0x3f + +/** + * struct smb347_charger - smb347 charger instance + * @lock: protects concurrent access to online variables + * @client: pointer to i2c client + * @mains: power_supply instance for AC/DC power + * @usb: power_supply instance for USB power + * @battery: power_supply instance for battery + * @mains_online: is AC/DC input connected + * @usb_online: is USB input connected + * @charging_enabled: is charging enabled + * @dentry: for debugfs + * @pdata: pointer to platform data + */ +struct smb347_charger { + struct mutex lock; + struct i2c_client *client; + struct power_supply mains; + struct power_supply usb; + struct power_supply battery; + bool mains_online; + bool usb_online; + bool charging_enabled; + struct dentry *dentry; + const struct smb347_charger_platform_data *pdata; +}; + +/* Fast charge current in uA */ +static const unsigned int fcc_tbl[] = { + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Pre-charge current in uA */ +static const unsigned int pcc_tbl[] = { + 100000, + 150000, + 200000, + 250000, +}; + +/* Termination current in uA */ +static const unsigned int tc_tbl[] = { + 37500, + 50000, + 100000, + 150000, + 200000, + 250000, + 500000, + 600000, +}; + +/* Input current limit in uA */ +static const unsigned int icl_tbl[] = { + 300000, + 500000, + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Charge current compensation in uA */ +static const unsigned int ccc_tbl[] = { + 250000, + 700000, + 900000, + 1200000, +}; + +/* Convert register value to current using lookup table */ +static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val) +{ + if (val >= size) + return -EINVAL; + return tbl[val]; +} + +/* Convert current to register value using lookup table */ +static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val) +{ + size_t i; + + for (i = 0; i < size; i++) + if (val < tbl[i]) + break; + return i > 0 ? i - 1 : -EINVAL; +} + +static int smb347_read(struct smb347_charger *smb, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(smb->client, reg); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to read reg 0x%x: %d\n", + reg, ret); + return ret; +} + +static int smb347_write(struct smb347_charger *smb, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(smb->client, reg, val); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to write reg 0x%x: %d\n", + reg, ret); + return ret; +} + +/** + * smb347_update_status - updates the charging status + * @smb: pointer to smb347 charger instance + * + * Function checks status of the charging and updates internal state + * accordingly. Returns %0 if there is no change in status, %1 if the + * status has changed and negative errno in case of failure. + */ +static int smb347_update_status(struct smb347_charger *smb) +{ + bool usb = false; + bool dc = false; + int ret; + + ret = smb347_read(smb, IRQSTAT_E); + if (ret < 0) + return ret; + + /* + * Dc and usb are set depending on whether they are enabled in + * platform data _and_ whether corresponding undervoltage is set. + */ + if (smb->pdata->use_mains) + dc = !(ret & IRQSTAT_E_DCIN_UV_STAT); + if (smb->pdata->use_usb) + usb = !(ret & IRQSTAT_E_USBIN_UV_STAT); + + mutex_lock(&smb->lock); + ret = smb->mains_online != dc || smb->usb_online != usb; + smb->mains_online = dc; + smb->usb_online = usb; + mutex_unlock(&smb->lock); + + return ret; +} + +/* + * smb347_is_online - returns whether input power source is connected + * @smb: pointer to smb347 charger instance + * + * Returns %true if input power source is connected. Note that this is + * dependent on what platform has configured for usable power sources. For + * example if USB is disabled, this will return %false even if the USB + * cable is connected. + */ +static bool smb347_is_online(struct smb347_charger *smb) +{ + bool ret; + + mutex_lock(&smb->lock); + ret = smb->usb_online || smb->mains_online; + mutex_unlock(&smb->lock); + + return ret; +} + +/** + * smb347_charging_status - returns status of charging + * @smb: pointer to smb347 charger instance + * + * Function returns charging status. %0 means no charging is in progress, + * %1 means pre-charging, %2 fast-charging and %3 taper-charging. + */ +static int smb347_charging_status(struct smb347_charger *smb) +{ + int ret; + + if (!smb347_is_online(smb)) + return 0; + + ret = smb347_read(smb, STAT_C); + if (ret < 0) + return 0; + + return (ret & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT; +} + +static int smb347_charging_set(struct smb347_charger *smb, bool enable) +{ + int ret = 0; + + if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) { + dev_dbg(&smb->client->dev, + "charging enable/disable in SW disabled\n"); + return 0; + } + + mutex_lock(&smb->lock); + if (smb->charging_enabled != enable) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto out; + + smb->charging_enabled = enable; + + if (enable) + ret |= CMD_A_CHG_ENABLED; + else + ret &= ~CMD_A_CHG_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + } +out: + mutex_unlock(&smb->lock); + return ret; +} + +static inline int smb347_charging_enable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, true); +} + +static inline int smb347_charging_disable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, false); +} + +static int smb347_update_online(struct smb347_charger *smb) +{ + int ret; + + /* + * Depending on whether valid power source is connected or not, we + * disable or enable the charging. We do it manually because it + * depends on how the platform has configured the valid inputs. + */ + if (smb347_is_online(smb)) { + ret = smb347_charging_enable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to enable charging\n"); + } else { + ret = smb347_charging_disable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to disable charging\n"); + } + + return ret; +} + +static int smb347_set_charge_current(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CHARGE_CURRENT); + if (ret < 0) + return ret; + + if (smb->pdata->max_charge_current) { + val = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl), + smb->pdata->max_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_FCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_FCC_SHIFT; + } + + if (smb->pdata->pre_charge_current) { + val = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl), + smb->pdata->pre_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_PCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_PCC_SHIFT; + } + + if (smb->pdata->termination_current) { + val = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl), + smb->pdata->termination_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_TC_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CHARGE_CURRENT, ret); +} + +static int smb347_set_current_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CURRENT_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->mains_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->mains_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_DC_MASK; + ret |= val << CFG_CURRENT_LIMIT_DC_SHIFT; + } + + if (smb->pdata->usb_hc_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->usb_hc_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_USB_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CURRENT_LIMIT, ret); +} + +static int smb347_set_voltage_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_FLOAT_VOLTAGE); + if (ret < 0) + return ret; + + if (smb->pdata->pre_to_fast_voltage) { + val = smb->pdata->pre_to_fast_voltage; + + /* uV */ + val = clamp_val(val, 2400000, 3000000) - 2400000; + val /= 200000; + + ret &= ~CFG_FLOAT_VOLTAGE_THRESHOLD_MASK; + ret |= val << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT; + } + + if (smb->pdata->max_charge_voltage) { + val = smb->pdata->max_charge_voltage; + + /* uV */ + val = clamp_val(val, 3500000, 4500000) - 3500000; + val /= 20000; + + ret |= val; + } + + return smb347_write(smb, CFG_FLOAT_VOLTAGE, ret); +} + +static int smb347_set_temp_limits(struct smb347_charger *smb) +{ + bool enable_therm_monitor = false; + int ret, val; + + if (smb->pdata->chip_temp_threshold) { + val = smb->pdata->chip_temp_threshold; + + /* degree C */ + val = clamp_val(val, 100, 130) - 100; + val /= 10; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_TEMP_THRESHOLD_MASK; + ret |= val << CFG_OTG_TEMP_THRESHOLD_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + ret = smb347_read(smb, CFG_TEMP_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_cold_temp_limit; + + val = clamp_val(val, 0, 15); + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_SOFT_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_hot_temp_limit; + + val = clamp_val(val, 40, 55) - 40; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_SOFT_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_cold_temp_limit; + + val = clamp_val(val, -5, 10) + 5; + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_HARD_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_hot_temp_limit; + + val = clamp_val(val, 50, 65) - 50; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_HARD_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT; + + enable_therm_monitor = true; + } + + ret = smb347_write(smb, CFG_TEMP_LIMIT, ret); + if (ret < 0) + return ret; + + /* + * If any of the temperature limits are set, we also enable the + * thermistor monitoring. + * + * When soft limits are hit, the device will start to compensate + * current and/or voltage depending on the configuration. + * + * When hard limit is hit, the device will suspend charging + * depending on the configuration. + */ + if (enable_therm_monitor) { + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_MONITOR_DISABLED; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->suspend_on_hard_temp_limit) { + ret = smb347_read(smb, CFG_SYSOK); + if (ret < 0) + return ret; + + ret &= ~CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED; + + ret = smb347_write(smb, CFG_SYSOK, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->soft_temp_limit_compensation != + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) { + val = smb->pdata->soft_temp_limit_compensation & 0x3; + + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_SOFT_HOT_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT; + + ret &= ~CFG_THERM_SOFT_COLD_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->charge_current_compensation) { + val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl), + smb->pdata->charge_current_compensation); + if (val < 0) + return val; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_CC_COMPENSATION_MASK; + ret |= (val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + return ret; +} + +/* + * smb347_set_writable - enables/disables writing to non-volatile registers + * @smb: pointer to smb347 charger instance + * + * You can enable/disable writing to the non-volatile configuration + * registers by calling this function. + * + * Returns %0 on success and negative errno in case of failure. + */ +static int smb347_set_writable(struct smb347_charger *smb, bool writable) +{ + int ret; + + ret = smb347_read(smb, CMD_A); + if (ret < 0) + return ret; + + if (writable) + ret |= CMD_A_ALLOW_WRITE; + else + ret &= ~CMD_A_ALLOW_WRITE; + + return smb347_write(smb, CMD_A, ret); +} + +static int smb347_hw_init(struct smb347_charger *smb) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Program the platform specific configuration values to the device + * first. + */ + ret = smb347_set_charge_current(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_current_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_voltage_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_temp_limits(smb); + if (ret < 0) + goto fail; + + /* If USB charging is disabled we put the USB in suspend mode */ + if (!smb->pdata->use_usb) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto fail; + + ret |= CMD_A_SUSPEND_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + if (ret < 0) + goto fail; + } + + ret = smb347_read(smb, CFG_OTHER); + if (ret < 0) + goto fail; + + /* + * If configured by platform data, we enable hardware Auto-OTG + * support for driving VBUS. Otherwise we disable it. + */ + ret &= ~CFG_OTHER_RID_MASK; + if (smb->pdata->use_usb_otg) + ret |= CFG_OTHER_RID_ENABLED_AUTO_OTG; + + ret = smb347_write(smb, CFG_OTHER, ret); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + /* + * Make the charging functionality controllable by a write to the + * command register unless pin control is specified in the platform + * data. + */ + ret &= ~CFG_PIN_EN_CTRL_MASK; + + switch (smb->pdata->enable_control) { + case SMB347_CHG_ENABLE_SW: + /* Do nothing, 0 means i2c control */ + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW: + ret |= CFG_PIN_EN_CTRL_ACTIVE_LOW; + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH: + ret |= CFG_PIN_EN_CTRL_ACTIVE_HIGH; + break; + } + + /* Disable Automatic Power Source Detection (APSD) interrupt. */ + ret &= ~CFG_PIN_EN_APSD_IRQ; + + ret = smb347_write(smb, CFG_PIN, ret); + if (ret < 0) + goto fail; + + ret = smb347_update_status(smb); + if (ret < 0) + goto fail; + + ret = smb347_update_online(smb); + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static irqreturn_t smb347_interrupt(int irq, void *data) +{ + struct smb347_charger *smb = data; + int stat_c, irqstat_e, irqstat_c; + irqreturn_t ret = IRQ_NONE; + + stat_c = smb347_read(smb, STAT_C); + if (stat_c < 0) { + dev_warn(&smb->client->dev, "reading STAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_c = smb347_read(smb, IRQSTAT_C); + if (irqstat_c < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_e = smb347_read(smb, IRQSTAT_E); + if (irqstat_e < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_E failed\n"); + return IRQ_NONE; + } + + /* + * If we get charger error we report the error back to user and + * disable charging. + */ + if (stat_c & STAT_C_CHARGER_ERROR) { + dev_err(&smb->client->dev, + "error in charger, disabling charging\n"); + + smb347_charging_disable(smb); + power_supply_changed(&smb->battery); + + ret = IRQ_HANDLED; + } + + /* + * If we reached the termination current the battery is charged and + * we can update the status now. Charging is automatically + * disabled by the hardware. + */ + if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) { + if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) + power_supply_changed(&smb->battery); + ret = IRQ_HANDLED; + } + + /* + * If we got an under voltage interrupt it means that AC/USB input + * was connected or disconnected. + */ + if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) { + if (smb347_update_status(smb) > 0) { + smb347_update_online(smb); + power_supply_changed(&smb->mains); + power_supply_changed(&smb->usb); + } + ret = IRQ_HANDLED; + } + + return ret; +} + +static int smb347_irq_set(struct smb347_charger *smb, bool enable) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Enable/disable interrupts for: + * - under voltage + * - termination current reached + * - charger error + */ + if (enable) { + ret = smb347_write(smb, CFG_FAULT_IRQ, CFG_FAULT_IRQ_DCIN_UV); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, + CFG_STATUS_IRQ_TERMINATION_OR_TAPER); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret |= CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } else { + ret = smb347_write(smb, CFG_FAULT_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret &= ~CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static inline int smb347_irq_enable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, true); +} + +static inline int smb347_irq_disable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, false); +} + +static int smb347_irq_init(struct smb347_charger *smb) +{ + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret, irq = gpio_to_irq(pdata->irq_gpio); + + ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, smb->client->name); + if (ret < 0) + goto fail; + + ret = request_threaded_irq(irq, NULL, smb347_interrupt, + IRQF_TRIGGER_FALLING, smb->client->name, + smb); + if (ret < 0) + goto fail_gpio; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + goto fail_irq; + + /* + * Configure the STAT output to be suitable for interrupts: disable + * all other output (except interrupts) and make it active low. + */ + ret = smb347_read(smb, CFG_STAT); + if (ret < 0) + goto fail_readonly; + + ret &= ~CFG_STAT_ACTIVE_HIGH; + ret |= CFG_STAT_DISABLED; + + ret = smb347_write(smb, CFG_STAT, ret); + if (ret < 0) + goto fail_readonly; + + ret = smb347_irq_enable(smb); + if (ret < 0) + goto fail_readonly; + + smb347_set_writable(smb, false); + smb->client->irq = irq; + return 0; + +fail_readonly: + smb347_set_writable(smb, false); +fail_irq: + free_irq(irq, smb); +fail_gpio: + gpio_free(pdata->irq_gpio); +fail: + smb->client->irq = 0; + return ret; +} + +static int smb347_mains_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, mains); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->mains_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_mains_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_usb_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, usb); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->usb_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_usb_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, battery); + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret; + + ret = smb347_update_status(smb); + if (ret < 0) + return ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + if (!smb347_is_online(smb)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + if (smb347_charging_status(smb)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!smb347_is_online(smb)) + return -ENODATA; + + /* + * We handle trickle and pre-charging the same, and taper + * and none the same. + */ + switch (smb347_charging_status(smb)) { + case 1: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 2: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = pdata->battery_info.technology; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = pdata->battery_info.voltage_min_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = pdata->battery_info.voltage_max_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + ret = smb347_read(smb, STAT_A); + if (ret < 0) + return ret; + + ret &= STAT_A_FLOAT_VOLTAGE_MASK; + if (ret > 0x3d) + ret = 0x3d; + + val->intval = 3500000 + ret * 20000; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + + ret = smb347_read(smb, STAT_B); + if (ret < 0) + return ret; + + /* + * The current value is composition of FCC and PCC values + * and we can detect which table to use from bit 5. + */ + if (ret & 0x20) { + val->intval = hw_to_current(fcc_tbl, + ARRAY_SIZE(fcc_tbl), + ret & 7); + } else { + ret >>= 3; + val->intval = hw_to_current(pcc_tbl, + ARRAY_SIZE(pcc_tbl), + ret & 7); + } + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = pdata->battery_info.charge_full_design; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = pdata->battery_info.name; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property smb347_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static int smb347_debugfs_show(struct seq_file *s, void *data) +{ + struct smb347_charger *smb = s->private; + int ret; + u8 reg; + + seq_printf(s, "Control registers:\n"); + seq_printf(s, "==================\n"); + for (reg = CFG_CHARGE_CURRENT; reg <= CFG_ADDRESS; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Command registers:\n"); + seq_printf(s, "==================\n"); + ret = smb347_read(smb, CMD_A); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_A, ret); + ret = smb347_read(smb, CMD_B); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_B, ret); + ret = smb347_read(smb, CMD_C); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_C, ret); + seq_printf(s, "\n"); + + seq_printf(s, "Interrupt status registers:\n"); + seq_printf(s, "===========================\n"); + for (reg = IRQSTAT_A; reg <= IRQSTAT_F; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Status registers:\n"); + seq_printf(s, "=================\n"); + for (reg = STAT_A; reg <= STAT_E; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + + return 0; +} + +static int smb347_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, smb347_debugfs_show, inode->i_private); +} + +static const struct file_operations smb347_debugfs_fops = { + .open = smb347_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smb347_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static char *battery[] = { "smb347-battery" }; + const struct smb347_charger_platform_data *pdata; + struct device *dev = &client->dev; + struct smb347_charger *smb; + int ret; + + pdata = dev->platform_data; + if (!pdata) + return -EINVAL; + + if (!pdata->use_mains && !pdata->use_usb) + return -EINVAL; + + smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL); + if (!smb) + return -ENOMEM; + + i2c_set_clientdata(client, smb); + + mutex_init(&smb->lock); + smb->client = client; + smb->pdata = pdata; + + ret = smb347_hw_init(smb); + if (ret < 0) + return ret; + + smb->mains.name = "smb347-mains"; + smb->mains.type = POWER_SUPPLY_TYPE_MAINS; + smb->mains.get_property = smb347_mains_get_property; + smb->mains.properties = smb347_mains_properties; + smb->mains.num_properties = ARRAY_SIZE(smb347_mains_properties); + smb->mains.supplied_to = battery; + smb->mains.num_supplicants = ARRAY_SIZE(battery); + + smb->usb.name = "smb347-usb"; + smb->usb.type = POWER_SUPPLY_TYPE_USB; + smb->usb.get_property = smb347_usb_get_property; + smb->usb.properties = smb347_usb_properties; + smb->usb.num_properties = ARRAY_SIZE(smb347_usb_properties); + smb->usb.supplied_to = battery; + smb->usb.num_supplicants = ARRAY_SIZE(battery); + + smb->battery.name = "smb347-battery"; + smb->battery.type = POWER_SUPPLY_TYPE_BATTERY; + smb->battery.get_property = smb347_battery_get_property; + smb->battery.properties = smb347_battery_properties; + smb->battery.num_properties = ARRAY_SIZE(smb347_battery_properties); + + ret = power_supply_register(dev, &smb->mains); + if (ret < 0) + return ret; + + ret = power_supply_register(dev, &smb->usb); + if (ret < 0) { + power_supply_unregister(&smb->mains); + return ret; + } + + ret = power_supply_register(dev, &smb->battery); + if (ret < 0) { + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return ret; + } + + /* + * Interrupt pin is optional. If it is connected, we setup the + * interrupt support here. + */ + if (pdata->irq_gpio >= 0) { + ret = smb347_irq_init(smb); + if (ret < 0) { + dev_warn(dev, "failed to initialize IRQ: %d\n", ret); + dev_warn(dev, "disabling IRQ support\n"); + } + } + + smb->dentry = debugfs_create_file("smb347-regs", S_IRUSR, NULL, smb, + &smb347_debugfs_fops); + return 0; +} + +static int smb347_remove(struct i2c_client *client) +{ + struct smb347_charger *smb = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(smb->dentry)) + debugfs_remove(smb->dentry); + + if (client->irq) { + smb347_irq_disable(smb); + free_irq(client->irq, smb); + gpio_free(smb->pdata->irq_gpio); + } + + power_supply_unregister(&smb->battery); + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return 0; +} + +static const struct i2c_device_id smb347_id[] = { + { "smb347", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smb347_id); + +static struct i2c_driver smb347_driver = { + .driver = { + .name = "smb347", + }, + .probe = smb347_probe, + .remove = __devexit_p(smb347_remove), + .id_table = smb347_id, +}; + +static int __init smb347_init(void) +{ + return i2c_add_driver(&smb347_driver); +} +module_init(smb347_init); + +static void __exit smb347_exit(void) +{ + i2c_del_driver(&smb347_driver); +} +module_exit(smb347_exit); + +MODULE_AUTHOR("Bruce E. Robertson "); +MODULE_AUTHOR("Mika Westerberg "); +MODULE_DESCRIPTION("SMB347 battery charger driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:smb347"); diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h new file mode 100644 index 000000000000..b3cb20dab55f --- /dev/null +++ b/include/linux/power/smb347-charger.h @@ -0,0 +1,117 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson + * Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SMB347_CHARGER_H +#define SMB347_CHARGER_H + +#include +#include + +enum { + /* use the default compensation method */ + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1, + + SMB347_SOFT_TEMP_COMPENSATE_NONE, + SMB347_SOFT_TEMP_COMPENSATE_CURRENT, + SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE, +}; + +/* Use default factory programmed value for hard/soft temperature limit */ +#define SMB347_TEMP_USE_DEFAULT -273 + +/* + * Charging enable can be controlled by software (via i2c) by + * smb347-charger driver or by EN pin (active low/high). + */ +enum smb347_chg_enable { + SMB347_CHG_ENABLE_SW, + SMB347_CHG_ENABLE_PIN_ACTIVE_LOW, + SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH, +}; + +/** + * struct smb347_charger_platform_data - platform data for SMB347 charger + * @battery_info: Information about the battery + * @max_charge_current: maximum current (in uA) the battery can be charged + * @max_charge_voltage: maximum voltage (in uV) the battery can be charged + * @pre_charge_current: current (in uA) to use in pre-charging phase + * @termination_current: current (in uA) used to determine when the + * charging cycle terminates + * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to + * pre-charge to fast charge mode + * @mains_current_limit: maximum input current drawn from AC/DC input (in uA) + * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB + * input + * @chip_temp_threshold: die temperature where device starts limiting charge + * current [%100 - %130] (in degree C) + * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C), + * granularity is 5 deg C. + * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C), + * granularity is 5 deg C. + * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C), + * granularity is 5 deg C. + * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C), + * granularity is 5 deg C. + * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit + * @soft_temp_limit_compensation: compensation method when soft temperature + * limit is hit + * @charge_current_compensation: current (in uA) for charging compensation + * current when temperature hits soft limits + * @use_mains: AC/DC input can be used + * @use_usb: USB input can be used + * @use_usb_otg: USB OTG output can be used (not implemented yet) + * @irq_gpio: GPIO number used for interrupts (%-1 if not used) + * @enable_control: how charging enable/disable is controlled + * (driver/pin controls) + * + * @use_main, @use_usb, and @use_usb_otg are means to enable/disable + * hardware support for these. This is useful when we want to have for + * example OTG charging controlled via OTG transceiver driver and not by + * the SMB347 hardware. + * + * Hard and soft temperature limit values are given as described in the + * device data sheet and assuming NTC beta value is %3750. Even if this is + * not the case, these values should be used. They can be mapped to the + * corresponding NTC beta values with the help of table %2 in the data + * sheet. So for example if NTC beta is %3375 and we want to program hard + * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50. + * + * If zero value is given in any of the current and voltage values, the + * factory programmed default will be used. For soft/hard temperature + * values, pass in %SMB347_TEMP_USE_DEFAULT instead. + */ +struct smb347_charger_platform_data { + struct power_supply_info battery_info; + unsigned int max_charge_current; + unsigned int max_charge_voltage; + unsigned int pre_charge_current; + unsigned int termination_current; + unsigned int pre_to_fast_voltage; + unsigned int mains_current_limit; + unsigned int usb_hc_current_limit; + unsigned int chip_temp_threshold; + int soft_cold_temp_limit; + int soft_hot_temp_limit; + int hard_cold_temp_limit; + int hard_hot_temp_limit; + bool suspend_on_hard_temp_limit; + unsigned int soft_temp_limit_compensation; + unsigned int charge_current_compensation; + bool use_mains; + bool use_usb; + bool use_usb_otg; + int irq_gpio; + enum smb347_chg_enable enable_control; +}; + +#endif /* SMB347_CHARGER_H */ -- 2.34.1