From ee1e0994ab1bd302fd03432de79c07751df47ffa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Jan 2014 14:37:57 +0100 Subject: [PATCH] regulator: s5m8767: Use GPIO for controlling Buck9/eMMC Add support for GPIO control (enable/disable) over Buck9. The Buck9 Converter is used as a supply for eMMC Host Controller. BUCK9EN GPIO of S5M8767 chip may be used by application processor to enable or disable the Buck9. This has two benefits: - It is faster than toggling it over I2C bus. - It allows disabling the regulator during suspend to RAM; The AP will enable it during resume; Without the patch the regulator supplying eMMC must be defined as fixed-regulator. Signed-off-by: Krzysztof Kozlowski Acked-by: Lee Jones Signed-off-by: Mark Brown --- drivers/regulator/s5m8767.c | 87 ++++++++++++++++++++++++++++- include/linux/mfd/samsung/core.h | 3 +- include/linux/mfd/samsung/s5m8767.h | 7 +++ 3 files changed, 93 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index d7164bb75d3e..6850a25a41c4 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -11,11 +11,8 @@ * */ -#include #include -#include #include -#include #include #include #include @@ -483,6 +480,65 @@ static struct regulator_desc regulators[] = { s5m8767_regulator_desc(BUCK9), }; +/* + * Enable GPIO control over BUCK9 in regulator_config for that regulator. + */ +static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767, + struct sec_regulator_data *rdata, + struct regulator_config *config) +{ + int i, mode = 0; + + if (rdata->id != S5M8767_BUCK9) + return; + + /* Check if opmode for regulator matches S5M8767_ENCTRL_USE_GPIO */ + for (i = 0; i < s5m8767->num_regulators; i++) { + const struct sec_opmode_data *opmode = &s5m8767->opmode[i]; + if (opmode->id == rdata->id) { + mode = s5m8767_opmode_reg[rdata->id][opmode->mode]; + break; + } + } + if (mode != S5M8767_ENCTRL_USE_GPIO) { + dev_warn(s5m8767->dev, + "ext-control for %s: mismatched op_mode (%x), ignoring\n", + rdata->reg_node->name, mode); + return; + } + + if (!gpio_is_valid(rdata->ext_control_gpio)) { + dev_warn(s5m8767->dev, + "ext-control for %s: GPIO not valid, ignoring\n", + rdata->reg_node->name); + return; + } + + config->ena_gpio = rdata->ext_control_gpio; + config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; +} + +/* + * Turn on GPIO control over BUCK9. + */ +static int s5m8767_enable_ext_control(struct s5m8767_info *s5m8767, + struct regulator_dev *rdev) +{ + int ret, reg, enable_ctrl; + + if (rdev_get_id(rdev) != S5M8767_BUCK9) + return -EINVAL; + + ret = s5m8767_get_register(rdev, ®, &enable_ctrl); + if (ret) + return ret; + + return regmap_update_bits(s5m8767->iodev->regmap_pmic, + reg, S5M8767_ENCTRL_MASK, + S5M8767_ENCTRL_USE_GPIO << S5M8767_ENCTRL_SHIFT); +} + + #ifdef CONFIG_OF static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev, struct sec_platform_data *pdata, @@ -520,6 +576,16 @@ static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, return 0; } +static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev, + struct sec_regulator_data *rdata, + struct device_node *reg_np) +{ + rdata->ext_control_gpio = of_get_named_gpio(reg_np, + "s5m8767,pmic-ext-control-gpios", 0); + if (!gpio_is_valid(rdata->ext_control_gpio)) + rdata->ext_control_gpio = 0; +} + static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, struct sec_platform_data *pdata) { @@ -574,6 +640,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, continue; } + s5m8767_pmic_dt_parse_ext_control_gpio(iodev, rdata, reg_np); + rdata->id = i; rdata->initdata = of_get_regulator_init_data( &pdev->dev, reg_np); @@ -940,6 +1008,9 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.driver_data = s5m8767; config.regmap = iodev->regmap_pmic; config.of_node = pdata->regulators[i].reg_node; + if (pdata->regulators[i].ext_control_gpio) + s5m8767_regulator_config_ext_control(s5m8767, + &pdata->regulators[i], &config); rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id], &config); @@ -949,6 +1020,16 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) id); return ret; } + + if (pdata->regulators[i].ext_control_gpio) { + ret = s5m8767_enable_ext_control(s5m8767, rdev[i]); + if (ret < 0) { + dev_err(s5m8767->dev, + "failed to enable gpio control over %s: %d\n", + rdev[i]->desc->name, ret); + return ret; + } + } } return 0; diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 41c9bde410c5..55510444b9fd 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -119,7 +119,8 @@ struct sec_platform_data { struct sec_regulator_data { int id; struct regulator_init_data *initdata; - struct device_node *reg_node; + struct device_node *reg_node; + int ext_control_gpio; }; /* diff --git a/include/linux/mfd/samsung/s5m8767.h b/include/linux/mfd/samsung/s5m8767.h index 2ab0b0f03641..243b58fec33d 100644 --- a/include/linux/mfd/samsung/s5m8767.h +++ b/include/linux/mfd/samsung/s5m8767.h @@ -183,9 +183,16 @@ enum s5m8767_regulators { S5M8767_REG_MAX, }; +/* LDO_EN/BUCK_EN field in registers */ #define S5M8767_ENCTRL_SHIFT 6 #define S5M8767_ENCTRL_MASK (0x3 << S5M8767_ENCTRL_SHIFT) +/* + * LDO_EN/BUCK_EN register value for controlling this Buck or LDO + * by GPIO (PWREN, BUCKEN). + */ +#define S5M8767_ENCTRL_USE_GPIO 0x1 + /* * Values for BUCK_RAMP field in DVS_RAMP register, matching raw values * in mV/us. -- 2.34.1