From ef59a20ba375aeb97b3150a118318884743452a8 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 21 Nov 2014 15:29:00 +0100 Subject: [PATCH] ARM: 8216/1: xscale: correct auxiliary register in suspend/resume According to the manuals I have, XScale auxiliary register should be reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to also use c1, c0, 1. The issue was primarily noticed thanks to qemu reporing "unsupported instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255 XScale Core manuals and in PXA270 and PXA320 Developers Guides. Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board. Tested-by: Robert Jarzmik Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Robert Jarzmik Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/mm/proc-xscale.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 23259f104c66..afa2b3c4df4a 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend) mrc p15, 0, r5, c15, c1, 0 @ CP access reg mrc p15, 0, r6, c13, c0, 0 @ PID mrc p15, 0, r7, c3, c0, 0 @ domain ID - mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r9, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit stmia r0, {r4 - r9} @ store cp regs @@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume) mcr p15, 0, r6, c13, c0, 0 @ PID mcr p15, 0, r7, c3, c0, 0 @ domain ID mcr p15, 0, r1, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg + mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg mov r0, r9 @ control register b cpu_resume_mmu ENDPROC(cpu_xscale_do_resume) -- 2.34.1