From fd55599834d6bb3f6dd90a7aa0a87e4616461261 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Thu, 30 Apr 2015 15:30:00 +0200 Subject: [PATCH] ARM: DT: STi: STiH407: Add dwc3 usb3 DT node. Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code are all present upstream, we can add the dwc3 DT node and have a working usb3 controller on stih407-b2120 and stih410-b2020. Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 363db4b544c9..bec7e82a0844 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -516,5 +516,32 @@ status = "disabled"; }; + + st_dwc3: dwc3@8f94000 { + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + ranges; + + status = "disabled"; + + dwc3: dwc3@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = ; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, + <&phy_port2 PHY_TYPE_USB3>; + }; + }; }; }; -- 2.34.1