From fd9175d2f603509e7ddf14e7b60633f6e88fb0e7 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 27 Jan 2013 09:24:28 -0800 Subject: [PATCH] hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883 Signed-off-by: Guenter Roeck --- Documentation/hwmon/ltc2978 | 134 +++++++++++++++++++----------- drivers/hwmon/pmbus/Kconfig | 4 +- drivers/hwmon/pmbus/ltc2978.c | 149 +++++++++++++++++++++++++++++----- 3 files changed, 218 insertions(+), 69 deletions(-) diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978 index dcb10be36e7f..dc0d08c61305 100644 --- a/Documentation/hwmon/ltc2978 +++ b/Documentation/hwmon/ltc2978 @@ -2,6 +2,10 @@ Kernel driver ltc2978 ===================== Supported chips: + * Linear Technology LTC2974 + Prefix: 'ltc2974' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2974 * Linear Technology LTC2978 Prefix: 'ltc2978' Addresses scanned: - @@ -10,6 +14,10 @@ Supported chips: Prefix: 'ltc3880' Addresses scanned: - Datasheet: http://www.linear.com/product/ltc3880 + * Linear Technology LTC3883 + Prefix: 'ltc3883' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3883 Author: Guenter Roeck @@ -17,9 +25,9 @@ Author: Guenter Roeck Description ----------- -The LTC2978 is an octal power supply monitor, supervisor, sequencer and -margin controller. The LTC3880 is a dual, PolyPhase DC/DC synchronous -step-down switching regulator controller. +LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply +monitor. LTC3880 is a dual output poly-phase step-down DC/DC controller. LTC3883 +is a single phase step-down DC/DC controller. Usage Notes @@ -41,60 +49,90 @@ Sysfs attributes in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. -in1_max Maximum input voltage. LTC2978 only. -in1_lcrit Critical minimum input voltage. LTC2978 only. +in1_max Maximum input voltage. LTC2974 and LTC2978 only. +in1_lcrit Critical minimum input voltage. LTC2974 and LTC2978 + only. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. -in1_max_alarm Input voltage high alarm. LTC2978 only. -in1_lcrit_alarm Input voltage critical low alarm. LTC2978 only. +in1_max_alarm Input voltage high alarm. LTC2974 and LTC2978 only. +in1_lcrit_alarm Input voltage critical low alarm. LTC2974 and LTC2978 + only. in1_crit_alarm Input voltage critical high alarm. -in1_lowest Lowest input voltage. LTC2978 only. +in1_lowest Lowest input voltage. LTC2974 and LTC2978 only. in1_highest Highest input voltage. in1_reset_history Reset input voltage history. -in[2-9]_label "vout[1-8]". Channels 3 to 9 on LTC2978 only. -in[2-9]_input Measured output voltage. -in[2-9]_min Minimum output voltage. -in[2-9]_max Maximum output voltage. -in[2-9]_lcrit Critical minimum output voltage. -in[2-9]_crit Critical maximum output voltage. -in[2-9]_min_alarm Output voltage low alarm. -in[2-9]_max_alarm Output voltage high alarm. -in[2-9]_lcrit_alarm Output voltage critical low alarm. -in[2-9]_crit_alarm Output voltage critical high alarm. -in[2-9]_lowest Lowest output voltage. LTC2978 only. -in[2-9]_highest Lowest output voltage. -in[2-9]_reset_history Reset output voltage history. - -temp[1-3]_input Measured temperature. +in[N]_label "vout[1-8]". + LTC2974: N=2-5 + LTC2978: N=2-9 + LTC3880: N=2-3 + LTC3883: N=2 +in[N]_input Measured output voltage. +in[N]_min Minimum output voltage. +in[N]_max Maximum output voltage. +in[N]_lcrit Critical minimum output voltage. +in[N]_crit Critical maximum output voltage. +in[N]_min_alarm Output voltage low alarm. +in[N]_max_alarm Output voltage high alarm. +in[N]_lcrit_alarm Output voltage critical low alarm. +in[N]_crit_alarm Output voltage critical high alarm. +in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only. +in[N]_highest Highest output voltage. +in[N]_reset_history Reset output voltage history. + +temp[N]_input Measured temperature. + On LTC2974, temp[1-4] report external temperatures, + and temp5 reports the chip temperature. On LTC2978, only one temperature measurement is supported and reports the chip temperature. On LTC3880, temp1 and temp2 report external - temperatures, and temp3 reports the chip - temperature. -temp[1-3]_min Mimimum temperature. LTC2978 only. -temp[1-3]_max Maximum temperature. -temp[1-3]_lcrit Critical low temperature. -temp[1-3]_crit Critical high temperature. -temp[1-3]_min_alarm Temperature low alarm. LTC2978 only. -temp[1-3]_max_alarm Temperature high alarm. -temp[1-3]_lcrit_alarm Temperature critical low alarm. -temp[1-3]_crit_alarm Temperature critical high alarm. -temp[1-3]_lowest Lowest measured temperature. LTC2978 only. -temp[1-3]_highest Highest measured temperature. -temp[1-3]_reset_history Reset temperature history. - -power[1-2]_label "pout[1-2]". LTC3880 only. -power[1-2]_input Measured power. - -curr1_label "iin". LTC3880 only. + temperatures, and temp3 reports the chip temperature. + On LTC3883, temp1 reports an external temperature, + and temp2 reports the chip temperature. +temp[N]_min Mimimum temperature. LTC2974 and LTC2978 only. +temp[N]_max Maximum temperature. +temp[N]_lcrit Critical low temperature. +temp[N]_crit Critical high temperature. +temp[N]_min_alarm Temperature low alarm. LTC2974 and LTC2978 only. +temp[N]_max_alarm Temperature high alarm. +temp[N]_lcrit_alarm Temperature critical low alarm. +temp[N]_crit_alarm Temperature critical high alarm. +temp[N]_lowest Lowest measured temperature. LTC2974 and LTC2978 only. + Not supported for chip temperature sensor on LTC2974. +temp[N]_highest Highest measured temperature. Not supported for chip + temperature sensor on LTC2974. +temp[N]_reset_history Reset temperature history. Not supported for chip + temperature sensor on LTC2974. + +power1_label "pin". LTC3883 only. +power1_input Measured input power. + +power[N]_label "pout[1-4]". + LTC2974: N=1-4 + LTC2978: Not supported + LTC3880: N=1-2 + LTC3883: N=2 +power[N]_input Measured output power. + +curr1_label "iin". LTC3880 and LTC3883 only. curr1_input Measured input current. curr1_max Maximum input current. curr1_max_alarm Input current high alarm. - -curr[2-3]_label "iout[1-2]". LTC3880 only. -curr[2-3]_input Measured output current. -curr[2-3]_max Maximum output current. -curr[2-3]_crit Critical output current. -curr[2-3]_max_alarm Output current high alarm. -curr[2-3]_crit_alarm Output current critical high alarm. +curr1_highest Highest input current. LTC3883 only. +curr1_reset_history Reset input current history. LTC3883 only. + +curr[N]_label "iout[1-4]". + LTC2974: N=1-4 + LTC2978: not supported + LTC3880: N=2-3 + LTC3883: N=2 +curr[N]_input Measured output current. +curr[N]_max Maximum output current. +curr[N]_crit Critical high output current. +curr[N]_lcrit Critical low output current. LTC2974 only. +curr[N]_max_alarm Output current high alarm. +curr[N]_crit_alarm Output current critical high alarm. +curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only. +curr[N]_lowest Lowest output current. LTC2974 only. +curr[N]_highest Highest output current. +curr[N]_reset_history Reset output current history. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 4f9eb0af5229..b1adad60d6ad 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -48,11 +48,11 @@ config SENSORS_LM25066 be called lm25066. config SENSORS_LTC2978 - tristate "Linear Technologies LTC2978 and LTC3880" + tristate "Linear Technologies LTC2974, LTC2978, LTC3880, and LTC3883" default n help If you say yes here you get hardware monitoring support for Linear - Technology LTC2978 and LTC3880. + Technology LTC2974, LTC2978, LTC3880, and LTC3883. This driver can also be built as a module. If so, the module will be called ltc2978. diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c index 945f7eced409..586a89ef9e0f 100644 --- a/drivers/hwmon/pmbus/ltc2978.c +++ b/drivers/hwmon/pmbus/ltc2978.c @@ -1,7 +1,8 @@ /* - * Hardware monitoring driver for LTC2978 and LTC3880 + * Hardware monitoring driver for LTC2974, LTC2978, LTC3880, and LTC3883 * * Copyright (c) 2011 Ericsson AB. + * Copyright (c) 2013 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,31 +27,43 @@ #include #include "pmbus.h" -enum chips { ltc2978, ltc3880 }; +enum chips { ltc2974, ltc2978, ltc3880, ltc3883 }; -/* LTC2978 and LTC3880 */ +/* Common for all chips */ #define LTC2978_MFR_VOUT_PEAK 0xdd #define LTC2978_MFR_VIN_PEAK 0xde #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf #define LTC2978_MFR_SPECIAL_ID 0xe7 -/* LTC2978 only */ +/* LTC2974 and LTC2978 */ #define LTC2978_MFR_VOUT_MIN 0xfb #define LTC2978_MFR_VIN_MIN 0xfc #define LTC2978_MFR_TEMPERATURE_MIN 0xfd -/* LTC3880 only */ +/* LTC2974 only */ +#define LTC2974_MFR_IOUT_PEAK 0xd7 +#define LTC2974_MFR_IOUT_MIN 0xd8 + +/* LTC3880 and LTC3883 */ #define LTC3880_MFR_IOUT_PEAK 0xd7 #define LTC3880_MFR_CLEAR_PEAKS 0xe3 #define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 +/* LTC3883 only */ +#define LTC3883_MFR_IIN_PEAK 0xe1 + +#define LTC2974_ID 0x0212 #define LTC2978_ID_REV1 0x0121 #define LTC2978_ID_REV2 0x0122 #define LTC3880_ID 0x4000 #define LTC3880_ID_MASK 0xff00 +#define LTC3883_ID 0x4300 +#define LTC3883_ID_MASK 0xff00 +#define LTC2974_NUM_PAGES 4 #define LTC2978_NUM_PAGES 8 #define LTC3880_NUM_PAGES 2 +#define LTC3883_NUM_PAGES 1 /* * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which @@ -63,9 +76,10 @@ enum chips { ltc2978, ltc3880 }; struct ltc2978_data { enum chips id; u16 vin_min, vin_max; - u16 temp_min, temp_max[LTC3880_NUM_PAGES]; + u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES]; u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES]; - u16 iout_max[LTC3880_NUM_PAGES]; + u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES]; + u16 iin_max; u16 temp2_max; struct pmbus_driver_info info; }; @@ -171,9 +185,9 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg) LTC2978_MFR_TEMPERATURE_MIN); if (ret >= 0) { if (lin11_to_val(ret) - < lin11_to_val(data->temp_min)) - data->temp_min = ret; - ret = data->temp_min; + < lin11_to_val(data->temp_min[page])) + data->temp_min[page] = ret; + ret = data->temp_min[page]; } break; case PMBUS_VIRT_READ_IOUT_MAX: @@ -189,6 +203,41 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg) return ret; } +static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct ltc2978_data *data = to_ltc2978_data(info); + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_PEAK); + if (ret >= 0) { + if (lin11_to_val(ret) + > lin11_to_val(data->iout_max[page])) + data->iout_max[page] = ret; + ret = data->iout_max[page]; + } + break; + case PMBUS_VIRT_READ_IOUT_MIN: + ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_MIN); + if (ret >= 0) { + if (lin11_to_val(ret) + < lin11_to_val(data->iout_min[page])) + data->iout_min[page] = ret; + ret = data->iout_min[page]; + } + break; + case PMBUS_VIRT_RESET_IOUT_HISTORY: + ret = 0; + break; + default: + ret = ltc2978_read_word_data(client, page, reg); + break; + } + return ret; +} + static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); @@ -230,15 +279,41 @@ static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) return ret; } +static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct ltc2978_data *data = to_ltc2978_data(info); + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_IIN_MAX: + ret = pmbus_read_word_data(client, page, LTC3883_MFR_IIN_PEAK); + if (ret >= 0) { + if (lin11_to_val(ret) + > lin11_to_val(data->iin_max)) + data->iin_max = ret; + ret = data->iin_max; + } + break; + case PMBUS_VIRT_RESET_IIN_HISTORY: + ret = 0; + break; + default: + ret = ltc3880_read_word_data(client, page, reg); + break; + } + return ret; +} + static int ltc2978_clear_peaks(struct i2c_client *client, int page, enum chips id) { int ret; - if (id == ltc2978) - ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); - else + if (id == ltc3880 || id == ltc3883) ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS); + else + ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); return ret; } @@ -251,8 +326,13 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, int ret; switch (reg) { + case PMBUS_VIRT_RESET_IIN_HISTORY: + data->iin_max = 0x7c00; + ret = ltc2978_clear_peaks(client, page, data->id); + break; case PMBUS_VIRT_RESET_IOUT_HISTORY: data->iout_max[page] = 0x7c00; + data->iout_min[page] = 0xfbff; ret = ltc2978_clear_peaks(client, page, data->id); break; case PMBUS_VIRT_RESET_TEMP2_HISTORY: @@ -270,7 +350,7 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, ret = ltc2978_clear_peaks(client, page, data->id); break; case PMBUS_VIRT_RESET_TEMP_HISTORY: - data->temp_min = 0x7bff; + data->temp_min[page] = 0x7bff; data->temp_max[page] = 0x7c00; ret = ltc2978_clear_peaks(client, page, data->id); break; @@ -282,8 +362,10 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, } static const struct i2c_device_id ltc2978_id[] = { + {"ltc2974", ltc2974}, {"ltc2978", ltc2978}, {"ltc3880", ltc3880}, + {"ltc3883", ltc3883}, {} }; MODULE_DEVICE_TABLE(i2c, ltc2978_id); @@ -308,10 +390,14 @@ static int ltc2978_probe(struct i2c_client *client, if (chip_id < 0) return chip_id; - if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) { + if (chip_id == LTC2974_ID) { + data->id = ltc2974; + } else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) { data->id = ltc2978; } else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) { data->id = ltc3880; + } else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) { + data->id = ltc3883; } else { dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); return -ENODEV; @@ -329,12 +415,29 @@ static int ltc2978_probe(struct i2c_client *client, data->vin_max = 0x7c00; for (i = 0; i < ARRAY_SIZE(data->vout_min); i++) data->vout_min[i] = 0xffff; - data->temp_min = 0x7bff; + for (i = 0; i < ARRAY_SIZE(data->iout_min); i++) + data->iout_min[i] = 0xfbff; + for (i = 0; i < ARRAY_SIZE(data->iout_max); i++) + data->iout_max[i] = 0x7c00; + for (i = 0; i < ARRAY_SIZE(data->temp_min); i++) + data->temp_min[i] = 0x7bff; for (i = 0; i < ARRAY_SIZE(data->temp_max); i++) data->temp_max[i] = 0x7c00; data->temp2_max = 0x7c00; switch (data->id) { + case ltc2974: + info->read_word_data = ltc2974_read_word_data; + info->pages = LTC2974_NUM_PAGES; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP2; + for (i = 0; i < info->pages; i++) { + info->func[i] |= PMBUS_HAVE_VOUT + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; + } + break; case ltc2978: info->read_word_data = ltc2978_read_word_data; info->pages = LTC2978_NUM_PAGES; @@ -359,8 +462,16 @@ static int ltc2978_probe(struct i2c_client *client, | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; - data->iout_max[0] = 0x7c00; - data->iout_max[1] = 0x7c00; + break; + case ltc3883: + info->read_word_data = ltc3883_read_word_data; + info->pages = LTC3883_NUM_PAGES; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN + | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; break; default: return -ENODEV; @@ -381,5 +492,5 @@ static struct i2c_driver ltc2978_driver = { module_i2c_driver(ltc2978_driver); MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for LTC2978 and LTC3880"); +MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, and LTC3883"); MODULE_LICENSE("GPL"); -- 2.34.1