deliverable/linux.git
2010-02-24  Uwe Kleine... arm/imx: let ARCH_MXC select COMMON_CLKDEV instead...
2010-02-24  Uwe Kleine... arm/imx: remove "NO_PAD_CTRL" from Copyright statements
2010-02-24  Uwe Kleine... arm/imx/audmux-v2: use SoC-prefixed names
2010-02-24  Uwe Kleine... arm/imx/audmux-v1: use SoC-prefixed names
2010-02-24  Uwe Kleine... arm/imx/gpio: remove a BUG_ON in hot path
2010-02-24  Uwe Kleine... arm/imx/gpio: use fls to find set bits in the irq statu...
2010-02-24  Uwe Kleine... arm/imx: use generic_handle_irq instead of open-coding it
2010-02-24  Uwe Kleine... arm/imx/gpio: GPIO_INT_{HIGH,LOW}_LEV are not necessari...
2010-02-24  Uwe Kleine... arm/mx2: split generic.c into mm-imx2[17].c
2010-02-24  Uwe Kleine... arm/mx2/devices: no need for IMX_NEEDS_DEPRECATED_SYMBO...
2010-02-24  Uwe Kleine... arm/mx2: define seperate gpio port descriptions for...
2010-02-24  Uwe Kleine... arm/mx2: use per-SOC nand device
2010-02-15  Uwe Kleine... arm/mx2: define seperate imx_nand devices for imx21...
2010-02-08  Uwe Kleine... arm/mx2/devices: use SoC-prefixed names where possible
2010-02-08  Uwe Kleine... arm/mx2: use cpp magic to create imx-ssi devices
2010-02-08  Uwe Kleine... arm/mx2: use cpp magic to create imx-mmc devices
2010-02-08  Uwe Kleine... arm/mx2: use cpp magic to create imx-i2c devices
2010-02-08  Uwe Kleine... arm/mx2: use cpp magic to create imx_gpt devices
2010-02-08  Uwe Kleine... arm/mx2: use cpp magic to create spi_imx devices
2010-02-02  Uwe Kleine... imx/mx25: rename files defining a machine to mach-...
2010-02-02  Uwe Kleine... imx: define per SOC ..._PHYS_OFFSET and use these in...
2010-02-02  Uwe Kleine... imx2x: convert serial.c to use soc-prefixed constants
2010-02-02  Uwe Kleine... mxc91231: redefine MXC91231_IO_ADDRESS using IMX_IO_ADDRESS
2010-02-02  Uwe Kleine... mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_A...
2010-02-02  Uwe Kleine... imx: WARN in clk_disable if the clock isn't enabled
2010-01-30  Uwe Kleine... mx25: deprecate UART1_BASE_ADDR and UART2_BASE_ADDR
2010-01-30  Uwe Kleine... mx1: prefix SOC specific defines with MX1_ and deprecat...
2010-01-29  Baruch Siachmx25pdk: platform code for the DryIce RTC module
2010-01-29  Baruch Siachmx25: add support for the DryIce rtc
2010-01-29  Sascha HauerMerge branch 'mxc-rc' into mxc-master
2010-01-29  Uwe Kleine... mx35: add a missing comma in a pad definition
2010-01-26  Vladimir ZapolskiyARM: IMX31: configure pins iomux for SDHC setup on...
2010-01-26  Uwe Kleine... mx2/mx3: debug-macro.S needs deprecated symbols
2010-01-26  Baruch Siachmx25: make the FEC AHB clk secondary of the IPG
2010-01-26  Baruch Siachmx25: fix time accounting
2010-01-26  Baruch Siachmx25: properly initialize clocks
2010-01-26  Baruch Siachmx25: remove unused mx25_clocks_init() argument
2010-01-26  Sascha Haueri.MX25: implement secondary clocks for uarts and fec
2010-01-26  Sascha Haueri.MX25: Allow secondary clocks in DEFINE_CLOCK
2010-01-21  Vladimir ZapolskiyARM: MX3: Fixed typo in declared enum type name.
2010-01-14  Baruch Siachmx25pdk: add NAND device support
2010-01-14  Baruch Siachmx25: add NAND support
2010-01-14  Baruch Siachmtd: mxc_nand: add MX25 to Kconfig
2010-01-14  Sascha HauerMerge branch 'imx' of git://git.pengutronix.de/git...
2010-01-12  Mark BrownMXC: Add AUDMUXv2 register decode to debugfs
2010-01-08  Uwe Kleine... imx: define functions to configure chip selects in...
2010-01-08  Uwe Kleine... imx: properly protect mach/mx{1,[25][157x]}.h from...
2010-01-08  Uwe Kleine... imx: remove unneeded include of mach/hardware.h
2010-01-08  Uwe Kleine... imx: remove mx1ads defconfig
2010-01-08  Uwe Kleine... imx: only define deprecated symbols conditionally
2010-01-08  Uwe Kleine... imx: mangle addresses after adding the offset
2010-01-08  Uwe Kleine... mx3/kzm_arm11_01: define and use board specific IO_ADDR...
2010-01-08  Uwe Kleine... imx35: define and use MX35_IO_ADDRESS
2010-01-08  Uwe Kleine... imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESS
2010-01-08  Uwe Kleine... imx31: define and use MX31_IO_ADDRESS
2010-01-08  Uwe Kleine... imx27: define and use MX27_IO_ADDRESS
2010-01-08  Uwe Kleine... imx21: define and use MX21_IO_ADDRESS
2010-01-08  Uwe Kleine... imx: provide helper macro to define IO_ADDRESS
2010-01-08  Uwe Kleine... imx/mx3: rename files defining a machine to mach-$mach.c
2010-01-05  Mark Brownmx31ads: Provide an IRQ range to the WM835x on the...
2010-01-05  Mark Brownmx31ads: Provide a name for EXPIO interrupt chip
2010-01-05  Mark Brownmx31ads: Allow enable/disable of switchable supplies
2010-01-05  Mark Brownmx31ads: Allow enable/disable of switchable supplies
2010-01-05  Mark Brownmx31ads: Convert 1133-EV1 to use dev_name to specify...
2010-01-05  Uwe Kleine... imx/mx2: rename files defining a machine to mach-$mach.c
2010-01-05  Uwe Kleine... imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT...
2010-01-05  Uwe Kleine... imx: rename Kconfig symbol for "Eukrea CPUIMX27 module"
2010-01-05  Uwe Kleine... imx/mx1: rename files defining a machine to mach-$mach.c
2010-01-05  Uwe Kleine... imx/mx1: add newline at end of Makefile
2010-01-05  Uwe Kleine... imx/mx3: rename clock.c and iomux.c to {clock,iomux...
2010-01-05  Uwe Kleine... imx/mach-mx3: use constants namespaced by the correspon...
2010-01-05  Uwe Kleine... imx/mach-mx2: use constants namespaced by the correspon...
2010-01-05  Uwe Kleine... imx/clock-imx27: use a macro to define registers
2010-01-05  Uwe Kleine... imx/clock-imx21: use a macro to define registers
2010-01-05  Uwe Kleine... imx/mx2: fold crm_regs.h into its only consumer
2010-01-04  Uwe Kleine... imx/mx3: depend on USB_ULPI for otg_ulpi_create
2010-01-04  Wolfgang DenkARM: MX3: make CPU revision number detection work on...
2010-01-04  Baruch Siachmx25: pdk: add platform code for FEC support
2010-01-04  Baruch Siachmx25: add support for FEC on i.MX25
2010-01-04  Baruch Siachmx25: s/NO_PAD_CTL/NO_PAD_CTRL/
2010-01-04  Valentin Longchampmx31moboard: fix usbh device names
2010-01-04  Guennadi Liakhovetskimx3: add support for the mt9v022 camera sensor to pcm03...
2010-01-04  Alan Carvalho... mx27: mxt_td60: Remove not used UART pins
2009-12-24  Linus TorvaldsLinux 2.6.33-rc2
2009-12-24  Linus TorvaldsMerge branch 'sysctl' of git://git./linux/kernel/git...
2009-12-24  Linus TorvaldsMerge branch 'hwpoison' of git://git./linux/kernel...
2009-12-24  Linus TorvaldsMerge branch 'release' of git://git./linux/kernel/git...
2009-12-24  Linus TorvaldsMerge branch 'upstream-linus' of git://git./linux/kerne...
2009-12-24  Linus TorvaldsMerge branch 'for-linus' of /home/rmk/linux-2.6-arm
2009-12-24  Linus TorvaldsMerge branch 'for-linus' of git://git./linux/kernel...
2009-12-24  Linus TorvaldsMerge branch 'sh/for-2.6.33' of git://git./linux/kernel...
2009-12-24  Russell KingVIDEO: cyberpro: pci_request_regions needs a persistent...
2009-12-24  Russell KingARM: dma-isa: request cascade channel after registering it
2009-12-24  Russell KingARM: footbridge: trim down old ISA rtc setup
2009-12-24  Russell KingARM: fix PAGE_KERNEL
2009-12-24  Borislav Petkovedac, pci: remove pesky debug printk
2009-12-24  Borislav Petkovamd64_edac: restrict PCI config space access
2009-12-24  Borislav Petkovamd64_edac: fix forcing module load/unload
2009-12-24  Borislav Petkovamd64_edac: make driver loading more robust
2009-12-24  Borislav Petkovamd64_edac: fix driver instance freeing
next
This page took 0.039034 seconds and 5 git commands to generate.