deliverable/linux.git
2010-06-03  Johannes Bergmac80211: move plink state
2010-06-03  Johannes Bergmac80211: drop control frames after processing
2010-06-03  Johannes Bergmac80211: remove useless work starting
2010-06-03  Johannes Bergmac80211: move WEP weak IV check
2010-06-03  Johannes Bergmac80211: clean up ieee80211_stop_tx_ba_session
2010-06-03  Juuso Oikarinenmac80211: Add support for hardware ARP query filtering
2010-06-03  Johannes Bergmac80211: remove tx status ampdu_ack_map
2010-06-03  Johannes Bergmac80211: remove bogus mod_timer() call
2010-06-03  Felix Fietkauath9k: use the key handling code from ath9k_common...
2010-06-03  Felix Fietkauath9k_common: use allocated key cache entries for multi...
2010-06-03  Felix Fietkauath9k_hw: add multicast key search support
2010-06-03  Rafał Miłeckissb: fast powerup delay calculation for PMU capable...
2010-06-03  Rafał Miłeckissb: update PMU init to match specs
2010-06-03  John W. LinvilleRevert "iwlwifi: move _agn statistics related structure"
2010-06-03  Helmut Schaart2x00: Remove suspicious register write
2010-06-03  Helmut Schaart2x00: fix use of mcs rates
2010-06-03  Helmut Schaart2x00: Update TX_SW_CFG initvals for 305x SoC
2010-06-03  Ivo van Doornrt2x00: Use IEEE80211_TX_CTL_STBC flag
2010-06-03  Helmut Schaart2x00: rt2800: disable TX STBC for 1 stream devices
2010-06-03  Gertjan van... rt2x00: Fix HT40 operation in rt2800.
2010-06-03  Gertjan van... rt2x00: Sync rt2800 MCU boot signal with Ralink driver.
2010-06-03  Gertjan van... rt2x00: Move PCI/USB specific register initializations...
2010-06-03  Gertjan van... rt2x00: Simplify check for external LNA in rt2800_init_...
2010-06-03  Gertjan van... rt2x00: Introduce separate interface type for PCI-express.
2010-06-03  Gertjan van... rt2x00: Move all register definitions for rt2800 to...
2010-06-03  Gertjan van... rt2x00: Remove RT2870 chipset identification.
2010-06-03  Gertjan van... rt2x00: Centralize rt2800 beacon writing.
2010-06-03  Gertjan van... rt2x00: Clean up USB vendor request buffer functions.
2010-06-03  Gertjan van... rt2x00: Fix rt2800usb TX descriptor writing.
2010-06-03  Gertjan van... rt2x00: Properly reserve room for descriptors in skbs.
2010-06-03  Gertjan van... rt2x00: Reverse calling order of bus write_tx_desc...
2010-06-03  Gertjan van... rt2x00: Push beacon TX descriptor writing to drivers.
2010-06-02  John W. Linvilleath9k_htc: fix build error when ATH9K_HTC_DEBUGFS not...
2010-06-02  Juuso Oikarinenwl1271: Fix scan parameter handling for 5GHz
2010-06-02  Juuso Oikarinenwl1271: Use proper rates for PSM entry/exit null-funcs...
2010-06-02  Luciano Coelhowl1271: the core wl1271 module shouldn't depend on...
2010-06-02  Juuso Oikarinenwl1271: Flush TX buffers to air before going to idle
2010-06-02  Juuso Oikarinenwl1271: Idle handling into own function
2010-06-02  Juuso Oikarinenwl1271: Prevent dropping of TX frames in joins
2010-06-02  Dan Carpenterath9k: cleanup: remove unneeded null check
2010-06-02  Julia Lawalldrivers/net/wireless/prism54: Use memdup_user
2010-06-02  Vasanthakumar... ath9k: Fix bug in validating received data length for...
2010-06-02  Vasanthakumar... ath9k: Fix bug in accessing skb->data of rx frame for...
2010-06-02  Vasanthakumar... ath9k: Clean up few function parameters in recv.c
2010-06-02  Sujithath9k: Move driver specific structures
2010-06-02  Sujithath9k: Move ath9k specific RX code to driver
2010-06-02  Tobias Klauserdrivers/net/wireless: Storage class should be before...
2010-06-02  Luis R. Rodriguezath9k_hw: Enable TX IQ calibration on AR9003
2010-06-02  Johannes Bergcfg80211: make action channel type optional
2010-06-02  Bruno Randolfath5k: print error message if ANI levels are out of...
2010-06-02  Bruno Randolfath5k: always calculate ANI listen time
2010-06-02  Bruno Randolfath5k: add sysfs files for ANI parameters
2010-06-02  Bruno Randolfath5k: use ath5k_softc as driver data
2010-06-02  Bruno Randolfath5k: clarify logic when to enable spur mitigation...
2010-06-02  Bruno Randolfath5k: remove ATH_TRACE macro
2010-06-02  Bruno Randolfath5k: run NF calibration only every 60 seconds
2010-06-02  Bruno Randolfath5k: Stop queues only for NF calibration
2010-06-02  Bruno Randolfath5k: move noise floor calibration into tasklet
2010-06-02  Bruno Randolfath5k: initialize calibration timers
2010-06-02  Jussi Kivilinnarndis_wlan: increase assocbuf size and validate associa...
2010-06-02  Vasanthakumar... ath9k_hw: Enable auto sleep for ar9003
2010-06-02  Vasanthakumar... ath9k: Fix power save with auto sleeping
2010-06-02  Vasanthakumar... ath9k: Make sure null func frame is acked before going...
2010-06-02  Walter Goldenswireless: fix several minor description typos
2010-06-02  Helmut Schaacfg80211: don't refuse HT20 channels on devices that...
2010-06-02  Sujithath9k_htc: Enable RX STBC for AR9271
2010-06-02  Sujithath9k_htc: Enable SGI in HT20 for AR9271
2010-06-02  Sujithath9k_htc: Update HT configuration properly
2010-06-02  Sujithath9k_htc: Cleanup rate initialization
2010-06-02  Sujithath9k_htc: Initvals update for AR9271
2010-06-02  Julia Lawalldrivers/net/wireless/orinoco: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/p54: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/ipw2x00: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/b43: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/ath/ath9k: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/iwmc3200wifi: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/libertas_tf: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/wl12xx: Use kmemdup
2010-06-02  Julia Lawalldrivers/net/wireless/libertas: Use kmemdup
2010-06-02  Dan Carpenterath9k/debug: fixup the return codes
2010-06-02  Dan Carpenterath9k/debug: improve the snprintf() handling
2010-06-02  Ming Leiath9k: fix dma direction for map/unmap in ath_rx_tasklet
2010-06-02  Amitkumar Karwarlibertas: Added callback functions to support SDIO...
2010-06-02  Juuso Oikarinenwl1271: Add support for NVS files with 5GHz band parameters
2010-06-02  Juuso Oikarinenwl1271: Update handling of the NVS file / INI parameters
2010-06-02  Sujithath9k_htc: Increase credit size
2010-06-02  Sujithath9k_htc: Remove HW queue translation
2010-06-02  Sujithath9k_htc: Initialize beacon/CAB queues
2010-06-02  Sujithath9k_htc: Add queue statistics to xmit debugfs file
2010-06-02  Vasanthakumar... ath9k: Enable Short GI in 20 Mhz for ar9287 and later...
2010-06-02  Julia Lawalldrivers/net/wireless/orinoco: Use kzalloc
2010-06-02  Luis R. Rodriguezath9k: enable the baseband watchdog events for AR9003
2010-06-02  Luis R. Rodriguezath9k_hw: add support for the AR9003 baseband watchdog
2010-06-02  Felix Fietkaumac80211: add the minstrel_ht rate control algorithm
2010-06-02  Gertjan van... rt2x00: Move rt2x00debug_dump_frame declaration to...
2010-06-02  Ohad Ben-Cohenwl1271: remove sdio ARM dependency
2010-06-02  Luis R. Rodriguezath9k_hw: rename the ar9003_initvals.h to ar9003_2p0_in...
2010-06-02  Luis R. Rodriguezath9k_hw: add support for the AR9003 2.2
2010-06-02  FUJITA Tomonorimwl8k: use the dma state API instead of the pci equivalents
2010-06-02  John W. LinvilleMerge branch 'wireless-next-2.6' of git://git./linux...
next
This page took 0.038813 seconds and 5 git commands to generate.